110V Adhesive Dispenser Hot Melt Glue 0-300°C Gluing Machine 900W Hot Melt Glue Spraying Gluing Machine Adhesive Injecting Dispenser Equipment 3KG/HR

Features：Model: X001Power: 900WSol speed: 3KG/HRSolvent capacity: 3KG/HRMaximum viscosity; 10000 CPSWorking temperature: 160-180°CTemperature control range: 0-300°Csafety precaution:Always wear safety gloves, goggles, and long-sleeved overalls to avoid burns from hot liquid hot melt adhesive1. The gas circuit should avoid too much water vapor entering2. The hot melt adhesive capacity must not exceed seven points of the capacity of the storage bucket.3.The maximum total air pressure is set to 4KG4. Before heating the melted glue, the pressure of the storage bucket must be released first.Preparation for operation1. Confirm the safety protection measures2. Check if the machine is 110VAC and there is no fluctuation in the pressure3. See if the temperature of the plastic bucket is set at about 170 degrees

• ★Model: X001: Adhesive Injecting Dispenser Equipment Hot Melt Glue Spray Injecting Machine110V.
• ★High Quality: All-purpose, good feeiciency, fast bonding, heat power saving no waster of glue and improvement in quality.
• ★Parameter 1: Maximum viscosity; 10000 CPS;Working temperature: 160-180°C;Temperature control range: 0-300°C.
• ★Parameter 2: Power: 900W; Sol speed: 3KG/HR;Solvent capacity: 3KG/HR.
• Hot melt glue dispensers are widely used in: toys (bonding, fixing, wiring, insulation), sealing. Packaging; handbags skin bags; small appliances. Wires. Connectors. Connectors; audio. Adhesive. Insulation; other manual or semi-automatic use of glue is required.